BMC Regenerate Marble Floors 3" kit to use a normal household polisher as a marble sander with 80mm abrasive and polishing discs to restore opaque marble floors to a mirror finish

In a single package, everything you need to transform a traditional floor polisher with three rotating brushes into a marble polisher. Contents: 2 sets of three 80 mm "sponge fiber" diamond abrasive discs (500 grit and 1000 grit) for sanding the floor in two stages, 1 set of three 80 mm white TNT nylon fiber discs for the final polishing stage, 1 bag of polishing powder for polishing up to 15 m2 of surface area. The discs' diameter allows them to fit into the internal rim of the hard-bristle brushes normally supplied with all traditional polishers. This set-up allows you to restore the mirror-like polish of marble, damaged by dull stains caused by acids, encrustations, or scratches. The system is suitable for both renovating a floor that has become very worn and damaged over time, and for maintaining the perfect mirror-like polish of slightly dull marble with the simple application of polishing powder. To use the kit, you need a traditional household floor polisher/vacuum cleaner with the classic set of three rotating brushes. No special skills are required. The appliance used, even a vintage one, will not be damaged by this "improper use" if you follow a few simple precautions outlined in the instruction sheet. This system can give a mirror-like polish to all marble, travertine, limestone, terrazzo, or Palladian floors. The result will be unexpectedly professional. However, it is not suitable for polishing granite, quartzite, all siliceous stones (or stones with low carbonate content), and some green marbles ( Guatemala/India Green and similar). The surface to be treated must be perfectly flat, free of bumps or recessed under-level joints. Yields: The diamond abrasives in the kit last approximately 80-120 square meters, while the bag of polishing powder can polish approximately 15 square meters. For larger surfaces, simply purchase the polishing powder needed to complete the job separately, keeping in mind that the average coverage is 2.5-3 square meters for every 100 grams of powder.

[* Home Floor Polisher Set-Up Kit with 3-Inch Diamond Discs *] Everything you need to transform a home floor polisher into a marble polisher

[* Do-It-Yourself Polishing of Old Marble Floors *] So you can use your old three-brush polisher to restore the shine of marble. You can do it yourself.

[* Do-It-Yourself Polishing of Marble Floors *] With 3 inch mm diamond abrasives, 500 and 1000 grit, and polishing powder, you can make marble shine like new with a professional finish.

[* With Chemical Polish *] Includes 3 inch felt pads and polishing powder to make marble and limestone shine like a mirror.

[* Polish Marble Using a Simple Appliance *] You can also use it to freshen up marble surfaces when they look a little dull

[* Do-It-Yourself Polishing of Old Marble Floors *] So you can use your old three-brush polisher to restore the shine of marble. You can do it yourself. [* Do-It-Yourself Polishing of Marble Floors *] With 5 inch mm diamond abrasives, 500 and 1000 grit, and polishing powder, you can make marble shine like new with a professional finish. [* With Chemical Polish *] Includes 5 inch felt pads and polishing powder to make marble and limestone shine like a mirror. [* Polish Marble Using a Simple Appliance *] You can also use it to freshen up marble surfaces when they look a little dull.

instructions for use